|
|
MONITOR SUPPORT CONFIGURATIONSA typical Monitor Support consists of an Upper Section and a Lower Section. Bright colors are shown for illustrative purposes only. Production Monitor supports come in off-white, or can be painted to the customer's specifications. Choose the Upper and Lower section that meets your needs below. Click on the thumbnail to see a larger picture. (Ceiling rails left out for clarity) Upper Sections(Click on Thumbnails to see a larger picture) Fixed
Mounted solid to the ceiling, or to Unistrut© channel in the ceiling, the monitor support has no mobility in the room.
Single Axis Mobile
Mounted to a trolley which rides in Unistrut© channel in the ceiling, the monitor support can travel back and forth in one direction (X).
Double Axis Mobile
Mounted to trolleys which ride in Unistrut© channel in the ceiling, the monitor support can travel back and forth in two directions (X & Y).
Radial
Mounted solid to the ceiling, or to Unistrut© channel in the ceiling, the monitor support can travel back and forth in the radial arm, and the arm can rotate 360° in the room.
Articulating
Mounted solid to the ceiling, or to Unistrut© channel in the ceiling, the monitor support can pivot from horizontal to 45° down, and the arm can rotate 360° in the room.
Wall Mount
Mounted solid to the wall, the monitor support has no mobility.
Lower SectionsSingle
The Single holds one monitor. The frame can be pivoted 360° and the monitor tilted 15°.
Horizontal Double
The Horizontal Double holds two monitors side by side. The frame can be pivoted 360° and each monitor tilted 15°.
Vertical Double
The Vertical Double holds two monitors, one on top of the other. The frame can be pivoted 360° and each monitor tilted 15°.
Quad
The Quad holds four monitors. The frame can be pivoted 360° and each monitor tilted 15°.
Custom ConfigurationsIn addition to the standard configurations listed above,
we also can design custom solutions for your application.
|
