Other Lab Products

LAB ACCESSORIES

I.V. Rail Clamps	Patient Safety Straps
Arm Board	Foam Pad
Panning Handle	Cardio Trak Digital Readouts
Smart Handle	Foot Switch Toe Lifts
Remote Control Bracket

These are products that may be used with the HMC Docking System, as well as with other Cardiac Systems. To inquire about your specific application, call 800-373-1009, or email us.

I.V. Rail Clamps

A single knob clamps any 3/4 inch (18mm) diameter rod or pole to the IV rail. It is solid aluminum with a very comfortable knob. Mounting direction is reversible.

Arm Board

(Click on thumbnail to see a larger image)

Mounts with IV Rail clamp, swivels for most comfortable position.

Panning Handle

Convenient mushroom style handle with table top lock release for panning. Clamps to IV rail. Disassembles easily for sterilization.

Smart Handle

(Click on thumbnail to see a larger image)

The Smart Handle consists of a switch body that holds all wiring and the ten micro switches. Over the switch body is a metal sleeve containing five rocker assemblies. Each two-way rocker operates either of the two switches. The sleeve is easily removed for sterilization. Multiple sleeves are available for busy labs or for use with Docking Tables so that a sterile sleeve is always readily available.

Ten functions can be controlled by the Smart Handle. Four of the rockers can operate the "two-way" functions that you choose. Typical configurations include:

	Table Height - Up / Down
	Rotation - RAO / LAO
	Skew -Cranial / Caudal
	SID - Plus / Minus

The fifth rocker has a different set of functions. One side is normally reserved for table top lock release. This rocker has a longer actuator and is easily operated while panning. The remaining switch is used for any single miscellaneous functions such as room lights, or to change the mode of the other switches.

Remote Control Bracket

This bracket mounts to the IV Rail using any common IV Rail Clamp including ours. It holds the Remote Control for Philips© cath labs. This keeps the remote handy while protecting it from falling and breaking.

Patient Safety Straps

Leg and Torso Straps attach to Table and secure patient during transport.

Foam Pad

One inch thick vinyl coated pads are custom molded to fit table top profile. Greatly increases patient comfort.

Cardio Trak Digital Readouts

(Click on thumbnail to see a larger image)

TABLE HEIGHT READOUT: Features one inch high L.E.D.s, reads in CM from table top to floor.

CARDIO TRAK 1000: For single plane cath lab, has control room console and remote readouts, tracks Rotation and Skew angles, Fluoro and Cine time as well as time of day and three non-dedicated minute/second timers.

CARDIO TRAK 2000: Used in bi-plane lab, times Fluoro A.P., Cine A.P., Fluoro Lateral, and Cine Lateral, features same timers as above, does not measure Rotation or Skew angles.

REMOTE TIME OF DAY: Matches Cardio Trak System, time is synchronized, mounts elsewhere in lab.

Foot Switch Toe Lifts

(Click on thumbnail to see a larger image)

To make it easier to position the Foot Switch in Philips© Cath Labs, we offer these retrofit Toe Lifts. They are available for both of the above styles of Foot Switch, and install quickly with hand tools.

For information or pricing on any of the above products, call 800-373-1009, or email us.